We advise you to first establish a laying plan so that you can be sure you have the correct number of tiles. Preparation: Before starting, ensure the floor is clean, dry, and level. If necessary, use a leveling compound to smooth the surface. Preparing the adhesive: Follow the manufacturer's instructions to prepare the adhesive. It is important to mix the adhesive thoroughly to achieve a homogeneous consistency. Laying the tiles: Begin laying the tiles from the center of the room and work outwards. Spread the adhesive on a small area using a notched trowel, then place the tile and press lightly to adhere it. Use tile spacers to space the tiles evenly. Cutting the tiles: If necessary, cut the tiles to fit edges and corners using a tile cutter or power saw. Grouting: Allow the adhesive to dry according to the manufacturer's instructions, then remove the spacers. Apply the grout with a trowel and clean off any excess with a damp sponge. Finishing: Once the joints are dry, clean the surface with a tile cleaner and apply a sealant to protect the tiles and make maintenance easier. To anticipate cuts or other unforeseen circumstances, Ligerio advises you to buy 10% more than the initial quantity planned
Performance Metrics
Abrasion Wear Resistance
EN ISO 10545-7; Meet PEI IV, U3P3E3C2 standard
Light Blocking
Unknown
Maintenance
To clean your tiles, we recommend our 3D all-surface cleaner, which is bactericidal and fungicidal
