Name: TopLab® Plus
Brand: Trespa TopLab
SKU: 101320512

Laminate

Overnight

Commercial

$$$

SLATE GREY

Sample size: 3.5 in x 3.5 in x 0.7 in

Arrives tomorrow

Thickness

(0.75 in)

Construction: Layers of natural fibres (paper and/or wood) impregnated with thermosetting resins and surface layer(s) on one or both sides, having decorative colours or designs
Content: Layers of natural fibres (paper and/or wood) impregnated with thermosetting resins and surface layer(s) on one or both sides, having decorative colours or designs
Finish: Crystal Matt
Format: Panel / Sheet

Impact Resistance: EN 438-2 : 21 Resistance to impact by large diameter ball - Less than or equal to 10mm
Overall Thickness: 0.98
Product Features: Customizable
Size: 100.4 in x 73.23 in; 120.08 in x 60.24 in

Application Filter: Countertop|Furniture
Installation: Acclimate panels before fabrication and install work surfaces on frames or base cabinets as shown on shop drawings and per manufacturer recommendations. Form tight-fitting butt joints using a two-part epoxy adhesive or mechanical fasteners positioned to be concealed after installation, and bond and seal curbs to the top of the work surface to form a square joint. Make cutouts for sinks and fixtures per the fixture and panel manufacturer recommendations. Installation may also follow SEFA 2-2010 Installation and AWS Standards Edition 2, Section 11. Surface protection is advised during the construction phase

Abrasion Wear Resistance: EN 438-2 : 10 Resistance to surface wear - Initial point more than or equal to 150; Wear value more than or equal to 200; EN 438-2 : 25 Resistance to scratching - more than or equal to 4 Rating (min)
Light Blocking: Complete
Lightfastness: EN 438-2 : 27 Grey scale ISO 105 A02 - more than or equal to 6
Maintenance: For general cleaning use household cleaners or water and soap, and wipe damp surfaces with an absorbent cloth. For severe soiling apply hot water with a diluted detergent- or soap-based cleaning agent using a sponge or soft nylon brush, leave to soak, rinse with clean water and dry. Remove solvent-based varnishes and adhesives with organic solvents such as acetone, white spirit, turpentine or petroleum. Do not use concentrated acids, caustics, abrasives or polishing agents. Suitable for frequent disinfection with 60-70% alcohol solutions, peroxide compounds (hydrogen peroxide and organic peracids) or quaternary ammonium compounds

Human Health Impact: CDPH Standard Method v1.2-2017, Low Emitting/Low VOC, UL GREENGUARD, UL GREENGUARD GOLD, PVC free, Halogenated Flame Retardants Free, Hexavalent Chromium Free, PFAS free, PFOS Free, Phthalates free, Precautionary List Free, REACH Compliant, Radon Free, Health Product Declaration (HPD), RoHS Compliant, RoHS 3 Compliant, Declare Product Label - LBC Red List Approved
VOC Emissions Testing Methodology: CDPH / CHPS 01350 Compliant

Climate Impact: Environmental Product Declaration (EPD), ISO 14001 Environmental Management System (EMS), Programme for the Endorsement of Forest (PEFC) Certified, Life Cycle Assessment (LCA)
Emissions: EN 717-2 Release of formaldehyde - Class E1

Ecosystem Health: ISO 14001 Environmental Management System (EMS)|Programme for the Endorsement of Forest (PEFC) Certified|Forest Stewardship Council (FSC) Certified|Forest Stewardship Council (FSC) Certified - Chain of Custody

Social Equity Impact: Forest Stewardship Council (FSC) Certified, Forest Stewardship Council (FSC) Certified - Chain of Custody, Programme for the Endorsement of Forest (PEFC) Certified, Build America, Buy America Act (BABAA) Compliant, Made in EU

Circular Economy: Environmental Product Declaration (EPD), Forest Stewardship Council (FSC) Certified, USDA Biopreferred®, USDA Certified Biobased Product, Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD)