Alesso Deco Marla

Name: Alesso Deco Marla
Brand: TileBar
SKU: 100382410

Porcelain Tile

Overnight

Commercial & Residential

Alesso Deco Marla

Sample size: 8 in x 8 in x 0.1 in

Arrives tomorrow

Application Filter: Bath|Facade|Flooring|Flooring/Wet Area Flooring|Kitchen|Wall|Wall/Backsplash|Wall/Wet Wall & Shower Wall
Installation: To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set. Appl as much adhesive as can be covered within 10-15 minutes
Recommended Grout: Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller

Abrasion Wear Resistance: PEI Rating 4
Hardness: 6 MOHS
Light Blocking: Complete
Maintenance: Manufacturer recommends using Unpolished Porcelain Maintenance Kit. Ceramic tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your ceramic tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although ceramic tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean ceramic tile surfaces. Sweep or vacuum dust and debris from the floor. Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5-10 minutes. Scrub the floor with a brush. Rinse the floor with clean, clear water to remove the cleaning solution. For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals
Slip Resistance: DCOF >0.42
Stain Resistance: Class 5
Tensile Strength: Breaking Strength >1300 N
Water Absorption: E<0.5%
Weather Resistance: Frost Resistant