When installing natural stone and marble tile, make sure all your products, substrate, tile, thinset and grout are compatible with each other. Inspect all materials before use and getting started. Dry lay or do a mockup to confirm your layout, grout joint size and that the final look meets your expectations. All installations should refer to the most current TCNA manual. Tile Council of North America 864.464. All TileBar installation instructions are suggestions. Specific installation questions should be brought to a local tile professional. Follow directions on all materials, especially mixing quantities. Inspect all materials before using to make sure there are no defects. Installation is acceptance, material claims will not be entertained after install. Blending different boxes of tile is recommended before and during installation. Ensure proper Safety – PPE (ex: Gloves)
Performance Metrics
Light Blocking
Complete
Maintenance
For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Use a clean soft cloth for best results. Too much cleaner or soap may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Do not use any abrasive cleaners