Box Pieces - 27; Box SF - 5.71;Pallet Boxes - 121; Pallet SF - 690.32
Technical Specifications
Grout Width
3/16 in
Overall Thickness
10
Size
2.75 in x 11 in
Tile Type
Field Tile
Tile Uniformity
Non-Rectified
Applications & Usage
Application Filter
Bath|Flooring|Flooring/Wet Area Flooring|Pool & Fountain|Wall|Wall/Wet Wall & Shower Wall
Installation
Prior to installation; installer must blend tiles from several different boxes to achieve an even distribution of color range. Installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. Once installed; the product is deemed accepted. Reference the most current TCNA Handbook, ANSI, manufacturer's specifications, and the Bedrosians Care & Maintenance guide for installation, outdoor use care and maintenance information. Improper installation, application, and/or use voids warranty. Please visit www.bedrosians.com for current product information. The maximum allowable installation offset is 33%. Manufacturer strongly recommends use of a leveling system during installation. DO NOT INSTALL IN POOLS; SPAS/HOT TUBS; AND/OR SUBMERGED APPLICATIONS UNLESS OTHERWISE INDICATED
Recommended Adhesive
ARDEX X4, LATICRETE 253 or BOSTIK Porcelain Mate
Recommended Grout
For any non-polished or non-honed porcelain/ceramic tile, a cement, urethane, or epoxy grout may be used. Most commonly, cementitious grout is used
Performance Metrics
Abrasion Wear Resistance
ASTM C1027 - 4 PEI
Hardness
4 Mohs
Maintenance
For ongoing maintenance, sweep or vacuum the tiles. Clean the tiles regularly with a pH neutral cleaner and rinse with clean water. Use only neutral, non-abrasive and non-acidic cleaners. Avoid use of any harsh cleaning products that contain bleach or acidic chemicals. Acid-based cleaners and harsh chemicals may etch the surface of the tile, especially tiles with polished or honed finishes. It is important that the cleaner is a non-oil, non-soap and non-animal fat based product. These products act like a magnet, attracting dirt and dust. Always test cleaning solutions on a small inconspicuous area before proceeding to clean the entire surface area. For hard to remove residue, a single disc floor machine with a white pad may be used. Be sure to wet the surface first when using a floor machine
Slip Resistance
DCOF is greater than or equal to 0.42
Tensile Strength
ASTM C648 is greater than or equal to 400 lbs
Water Absorption
ASTM C373 is less than or equal to 1%
Weather Resistance
ASTM C1026 - Unaffected
Sustainability
Human Health
Human Health Impact
CDPH Standard Method v1.2-2017, Low Emitting/Low VOC, UL GREENGUARD, UL GREENGUARD GOLD
