Material Bank

TileBar Colorplay Inflex | Product

Core Specs

General Information

Color Name: Emerald Green
Manufacturer SKU: TLCERTEMRCRIFX4.5X18
Price Range: $$$
Product Name: Colorplay Inflex

Material & Finish

Construction: Glazed
Content: Ceramic
Finish: Glossy
Format: Modular
Shade Variation: V1: uniform - low - no change - monochromatic
Surface Sheen: Glossy

Availability & Procurement

Availability: Confirm Stock Level with Sales Rep
Country Of Origin: Spain
Manufacturing Location: Spain
Order Increments: Coverage - 0.54, Pieces per Box - 12, Sqft per Box - 6.53

Technical Specifications

Grout Width: 1/8 in
Overall Thickness: 18
Size: 4.43 in x 17.62 in
Tile Type: Field Tile, Subway Tile, 3 Dimensional

Applications & Usage

Application Filter: Bath|Kitchen|Wall|Wall/Backsplash|Wall/Wet Wall & Shower Wall
Installation: Please refer to and install our products to the standards set by the TCNA
Recommended Adhesive: Bostik PM
Recommended Grout: We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller

Performance Metrics

Light Blocking: Complete
Maintenance: Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Ceramic tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your ceramic tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although ceramic tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean ceramic tile surfaces. For cleaning unpolished surfaces, follow these instructions: Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture. Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method. Rinse the floor with clean, clear water to remove the cleaning solution. For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals. Always Remember: Do not clean tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color. Do not use wax, oil-based, abrasive cleaners, or sealants. Agents that contain any dyes or colors are not recommended. Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors. Do not use steel wool pads, because loose steel particles may create rust stains in the grout
Tensile Strength: E > 12 N/mm2
Water Absorption: >10%

Sustainability

Human Health

Human Health Impact: Low Emitting/Low VOC

Climate Health

Climate Impact: Sustainability Action Plan

Social Health & Equity

Sustainability Action Plan: Sustainability Action Plan