Copperlite Facet

Name: Copperlite Facet
Brand: Laminart
SKU: 101986797

Laminate

Overnight

Commercial & Residential

$$$$

Copperlite Facet

Sample size: 3.3 in x 5 in x 0.1 in

Arrives tomorrow

Collection Name: Metal-art
Manufacturer SKU: 669
Price Range: $$$$
Product Name: Copperlite Facet
Series Name: Metal-Art
Warranty: LaminArt has no control over the end products fabricated with the materials sold, no warranty or guarantee is implied, other than those set forth above, and is limited to the replacement cost of the material alone
Manufacturer Notes: Laminart®, Inc. expressly warrants that its products are free of defects in material and workmanship, are of merchantable quality, and meet or exceed performance standards for high-pressure decorative laminates as established by NEMA, LD 3-2005. Please note that some Laminart® products contain special pearlized inks and do not meet NEMA standards for abrasion/scratch resistance in all finishes. Inasmuch as Laminart has no control over the end products fabricated with the materials sold, no warranty or guarantee is expressed or implied, other than those set forth above, and is limited to the replacement cost of the material alone

Construction: Phenolic resin-impregnated kraft sheets laminated with aluminum foil and epoxy varnish protective layer
Content: Phenolic resin-impregnated kraft sheets laminated with melamine resin-impregnated decorative and overlay sheets
Finish: Facet
Format: Panel / Sheet

Application Filter: Wall
Installation: Refer to the Installation Sheet PDF
Suitable Substrates: Suitable substrates may include but are not limited to particleboard (minimum density 45 pounds/cubic foot), medium-density fiberboard (MDF) or high density fiberboard (HDF). Materials with insufficient dimensional stability or internal bond strength such as plywood, steel, aluminum, fiber reinforced plastic, plaster, gypsum board, and similar materials are not recommended for use as substrates.

Abrasion Wear Resistance: EN 438 - = 50 cycles
Flammability: Fire Rating, ASTM E 84 Class II
Flexural Strength: EN 438 Bending Radius - 4.72 in
Maintenance: Metal-Art should be cleaned with a damp cloth and gentle, rubbing motion. Paper towels not recommended. If necessary, ordinary soap or household cleaner may be used for more difficult stains. Avoid abrasive cleaning products, solvents, polish or scrapers. For post fabrication stain removal, it is recommended that the cleanser be tested first in an inconspicuous area
Stain Resistance: Reagents 1-10 - No Effect, Reagents 11-15 - No Effect
Water Resistance: Boiling Water Resistance - No Effect

Human Health Impact: Health Product Declaration (HPD), UL GREENGUARD, UL GREENGUARD GOLD, CDPH Standard Method v1.2-2017, Low Emitting/Low VOC, Formaldehyde Free, PVC free
VOC Emissions Testing Methodology: CDPH / CHPS 01350 Compliant

Climate Impact: Environmental Product Declaration (EPD), ISO 14001 Environmental Management System (EMS), CARB Compliant

Circular Economy: Environmental Product Declaration (EPD), Health Product Declaration (HPD), Recycled Content, Recycled Content - Post-Consumer, SCS Recycled Content Certified