Danum Valley

Name: Danum Valley
Brand: Wilsonart
SKU: 102020083

Quartz Agglomerate Surfaces

Overnight

Commercial & Residential

Beige

Sample size: 1.8 in x 5.9 in x 0.2 in

Arrives tomorrow

Construction: Quartz agglomerate, resin binders, and pigments are blended together. Using the Bretonstone® vacuum vibro-compaction method, the mixture is polymerized and cast into slabs
Content: Up to 93 percent quartz aggregate combined with polyester resin binders and proprietary pigments that are homogeneous, with uniform color throughout their thickness
Finish: Natural Matte
Format: Slab

Availability: Made to Order / Special Order, Typically Stocked
Country Of Origin: United States
Custom Capabilities: Color is customizable. Minimum order quantities may apply and will require extended lead times. Contact your local representative for complete order requirements
Lead Time: Approximately 7 - 10 business days

Impact Resistance: EN14617-9 tested. Results between 3.4-7.35
Overall Thickness: 3
Size: 126 in x 61 in
Total Weight: 0.79 in (2 cm) thick = 10 lbs/sqft, 1.18 in (3 cm) thick = 15 lbs/sqft

Application Filter: Bath|Countertop|Fireplace|Fireplace/Fireplace Mantel|Fireplace/Fireplace Surround|Kitchen|Partition|Partition/Toilet Partition|Furniture|Wall|Wall/Backsplash|Window
Installation: Installation varies depending on application. Typically, support is required every 24in. Wet fabrication process must be used when cutting, routing, and finishing. Wear a dust mask and ensure there is proper ventilation to avoid potential hazards from silica dust. Refer to the Specification PDF for additional information
Recommended Adhesive: Use Wilsonart Hard Surface Adhesive for seam bonding. Pigmented knife grade adhesives are also acceptable. A mildew-resistant elastomeric sealant for filling gaps between countertops and terminating substrates is recommended in wet environment applications. For wall cladding applications, use 100% silicone when adhering to substrate.
Suitable Substrates: For wall cladding applications, use cement board (Durock or equivalent). The substrate surface must be sound, flat, smooth, and free of dust or other contaminates during installation. Sub-wall must be sound and able to support the weight of the material.

Abrasion Wear Resistance: ASTM C501 tested. Result of >100in-lbs. EN14617-4 tested, Result of 23.6 – 27.5
Compression: ASTM C170 (Compressive Strength; One Axis - Dry) tested. Result of >20,000psi
Flammability: ASTM E 84 tested. Class A / Class 1
Flexural Strength: ASTM D 790 (Flexural Strength) tested. Result of >6000psi. Passes 31 to 75 psi EN14617-2.
Light Blocking: Unknown
Maintenance: For everyday cleaning, wipe surface with a soft cloth, soap, and water. A mild household cleaner such as Windex®, Green Works® or 409® are acceptable. After cleaning, towel dry to avoid streaks. Spills should be wiped up immediately. No sealing or polishing necessary. Avoid bleach, oven cleaners and abrasive pads or powders
Water Absorption: ASTM C97 and EN 14617-1 tested. Result of <0.03%
Weather Resistance: ISO 4586 tested for High Temperature Resistance. No Effect to Slight Effect

Human Health Impact: CDPH Standard Method v1.2-2017, Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD), Low Emitting/Low VOC, NSF/ANSI 51 Certified Food Equipment Materials, UL GREENGUARD, UL GREENGUARD GOLD

Circular Economy: Declare Product Label, Declare Product Label - LBC Red List Approved, Health Product Declaration (HPD)