Material Bank

TileBar Eternal Diamond | Product

Core Specs

General Information

Collection Name: Eternal
Color Name: Birch
Manufacturer SKU: CRDFNDMDBRCH
Price Range: $$$$$
Product Name: Eternal Diamond

Material & Finish

Content: Porcelain
Finish: Matte
Format: Modular
Shade Variation: V4: substantial - random - large variety - extreme
Surface Sheen: Matte

Availability & Procurement

Availability: Typically Stocked
Country Of Origin: Italy
Manufacturing Location: Italy
Order Increments: Coverage - 0.76

Technical Specifications

Grout Width: 3/16 in
Overall Thickness: 8.5
Size: Diamond Mosaic
Tile Type: Mosaic Tile

Applications & Usage

Application Filter: Bath|Facade|Flooring|Kitchen|Pool & Fountain|Wall|Wall/Backsplash|Wall/Wet Wall & Shower Wall
Installation: Please refer to and install our products to the set standards set by the TCNA. To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. Apply as much adhesive as can be covered within 10-15 minutes
Recommended Adhesive: Bostik PM
Recommended Grout: Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller

Performance Metrics

Abrasion Wear Resistance: PEI 5
Hardness: 7 MOHS
Light Blocking: Complete
Maintenance: Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces. For cleaning unpolished surfaces, follow these instructions: Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture. Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method. Rinse the floor with clean, clear water to remove the cleaning solution. For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals. Do not clean tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color. Do not use wax, oil-based, abrasive cleaners, or sealants. Agents that contain any dyes or colors are not recommended. Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors. Do not use steel wool pads, because loose steel particles may create rust stains in the grout
Slip Resistance: DCOF >.42 (.5)
Stain Resistance: Yes
Water Absorption: 0.10%
Weather Resistance: Frost Resistant

Sustainability

Human Health

Human Health Impact: Low Emitting/Low VOC

Climate Health

Climate Impact: Environmental Product Declaration (EPD)
GWP Functional Unit: kg CO2e/m2
LCA Optimization Plan: true

Social Health & Equity

Sustainability Action Plan: Sustainability Action Plan

Circular Economy

Circular Economy: Environmental Product Declaration (EPD)

Certifications & Disclosures

Environmental Product Declaration: Industry-Wide EPD
LEED: May contribute toward LEED Credits