Wood veneer front and back, stained, and lacquered (prefinished). Top layer of real wood veneer stained and UV protected with six layers of UV-lacquer, applied sequentially by means of a rolling technique and intermediate curing; a core of MDF with a high density of 700 kg/m³ (±50 kg/m³) and a backing layer of veneer. The HPLT (High Pressure Low Temperature) press procedure used by Decospan guarantees the best quality for each panel. The process follows the DSI-method, ensuring complete saturation of the wood fibers and a significantly tight bond. Exclusive Quality: Both sides of the panel have Shinnoki quality veneer, for the most harmonious look available. Premium Quality: Shinnoki quality veneer on the front side. The back has the Shinnoki look and feel, while allowing for a bit more character in the veneer
Content
MDF Board with Wood Veneer
Finish
Prefinished. Stained with water-based colorants and protected with six layers ultra-low emitting acrylate urethane UV-cured varnish (99.5% solids), applied sequentially by rolling technique and intermediate curing; mat finish (2±1), semi-mat finish (7±3)
Format
Panel / Sheet
Wood Species
Oak
Availability & Procurement
Availability
Typically Stocked, Stocked in North America
Country Of Origin
Belgium
Order Increments
25 panels per pack. Gross dimensions per pack: 2800 x 1250 x 580 mm (49.2 in x 110.2 in x 22.8 in). Gross weight per pack: 1200 kg (2646 lbs)
Technical Specifications
Edge End
Edgebanding available in veneer and ABS; 24 and 48 mm
Impact Resistance
EN 438-2/20 - = 4 N (Wegner)
Overall Thickness
19
Size
2790 mm x 1240 mm x 19 mm (4 ft x 9 ft x 3/4 in)
Applications & Usage
Application Filter
Kitchen|Furniture|Wall
Performance Metrics
Abrasion Wear Resistance
EN 14354 / D - 600 turns, Scratch Resistance - EN 438-2/30 B - Class 5
Normal maintenance involves no more than removing dust with a soft, dry cloth. A slightly damp cloth can also be used, but avoid using too much water. If liquids are spilled, it is recommended that they are dried immediately. Tough dirt can be removed using water and a mild cleaning agent or a detergent. Never use a cleaner based on acetone or ethyl butyl acetate without consulting Decospan, as these substances can leave marks that cannot be removed. Wax and oil based products can also cause damage.
Sustainability
Human Health
Human Health Impact
REACH Compliant, CE Certified, PFOS Free, EN 16516, PFAS free, M1 Emissions Classification, Phthalates free, EcoVadis
Climate Health
Climate Impact
Life Cycle Assessment (LCA), EcoVadis, LCA Optimization, CE Certified, Environmental Product Declaration (EPD), 100% Recyclable, Sustainability Action Plan
Ecosystem Health
Ecosystem Health
CE Certified|Forest Stewardship Council (FSC) Certified|EcoVadis
Social Health & Equity
Social Equity Impact
Forest Stewardship Council (FSC) Certified, EcoVadis
