- Elongation
- ASTM D638 Tested. Between 4.8% - 5% at yield and 40% - 50% at break.
- Flammability
- Non-combustible
- Flexural Strength
- ASTM D790 Tested. Bewteen 11,200 psi - 12,000 psi depending on material thickness.
- Hardness
- 6-7 Mohs Scale; ASTM C1326 Knoop Hardness- 832,065 lb/in²
- Light Blocking
- Complete
- Lightfastness
- ASTM G155 Tested
- Maintenance
- All dirt and residues that appear on interior or exterior glass surfaces should be cleaned thoroughly. Cleaning should begin with soaking the glass surfaces with clean water and soap to loosen dirt and debris. Using a mild, non-abrasive commercial window washing solution, uniformly apply the solution to the glass surfaces with a brush, strip washer or other non-abrasive applicator. Immediately following the application of the cleaning solution, a squeegee should be used to remove all cleaning solution from the glass surface. Care should be taken to ensure that no metal parts of the cleaning equipment come in contact with the glass surface. All water and cleaning solutions should be dried from the window gaskets and seals to avoid degradation of these materials
- Performance
- Meets the requirements of ANSI Z97.1 Class A and CPSC 16 CFR 1201 Cat II
- Tensile Strength
- ASTM D638 Tested.7,700 psi at yield and 3,800 psi at break.
- Water Absorption
- ASTM D570 Tested. Between 0.1% - 0.2% depending on material thickness
