TerraMai Acoustic Wall Panels are constructed of natural, solid wood assembled on a rigid acoustic board. The panels should be stored in a clean, dry, controlled environment between 60°F (16°C) and 80°F (27°C) and 30% to 50% RH, until the wood has achieved equilibrium. Follow the Flooring & Paneling Acclimation Guide found at TerraMai.com
Material & Finish
Construction
Surfaced four sides (S4S). Four 2-1/4 in (57 mm) wide x 1/2 in (13 mm) deep x 96 in (2,438 mm) long slats spaced 3/4 in (19 mm) apart installed on 3/8 in (10 mm) thick x 12 in (305 mm) wide x 96 in (2,438 mm) long, 50% post-consumer recycled black PET rigid Acoustic board with nine 9/16 in (14 mm) thick x 1-1/16 in (27 mm) wide x 12 in (305 mm) long rails painted black
Content
Solid real wood with pre-installed acoustic backing
Finish
Low-VOC Matte Polyurethane
Wood Grade
Mixed grain with occasional small sound tight knots or open knots not to exceed 1/2 in prefilled with sanding dust mixed with glue
Availability & Procurement
Availability
Quick Ship
Country Of Origin
United States
Lead Time
3-10 business days
Order Increments
Two panels per box, palletized
Technical Specifications
Size
1-7/16 in (37 mm) thick x 12 in (305 mm) face width x 8 ft (2,438 mm) fixed lengths
Applications & Usage
Application Filter
Ceiling|Wall
Installation
Wall: Z-Clips or face screw through PET Acoustic backer and through cross rails to structural members; Ceiling: Screw through Heavy Duty 15/16 in T-Bar grid system into cross rails or Face screw through PET Acoustic backer and through cross rails to structural members
Performance Metrics
Flammability
Class A Fire Retardant
Maintenance
For general cleaning of the acoustic board of your TerraMai Acoustic Wall Panels, vacuum the material with a soft, clean brush designed for upholstery, taking care not to scratch the wood slats. In the event of a wet spill, use a clean dry cloth to blot up the spill immediately. This will prevent absorption by the acoustic board. DO NOT RUB THE STAIN. Rubbing the stain can physically change the acoustic board in this area. If a stain is still present, use a mild detergent and clean water. As with any cleaning method, test first in an inconspicuous area. Damage to the acoustic board or wood slats from cleaning procedures is not covered under warranty. To clean with a mild detergent, make a solution of three parts water to one part mild enzyme-based detergent in a clean container. Gently blot with a clean cloth – DO NOT SCRUB. Use clean water and moist paper towels to introduce a little more water into the stain, but do not allow water to run down the panels. Finish by using clean paper towels (dry) to blot until the acoustic board is dry. Note: Too much water on the panels could allow water to saturate behind the slats and cause the wood to warp, twist, or otherwise fail
Sustainability
Human Health
Human Health Impact
CDPH Standard Method v1.2-2017, Low Emitting/Low VOC
