Bath|Flooring|Flooring/Wet Area Flooring|Pool & Fountain|Wall|Wall/Wet Wall & Shower Wall
Recommended Grout
For any non-polished or non-honed porcelain/ceramic tile, a cement, urethane, or epoxy grout may be used. Most commonly, cementitious grout is used
Performance Metrics
Bond Strength
Passes A137.2-7.7
Hardness
7 Mohs
Maintenance
For ongoing maintenance, sweep or vacuum the tiles. Clean the tiles regularly with a pH neutral cleaner and rinse with clean water. Use only neutral, non-abrasive and non-acidic cleaners. Avoid use of any harsh cleaning products that contain bleach or acidic chemicals. Acid-based cleaners and harsh chemicals may etch the surface of the tile, especially tiles with polished or honed finishes. It is important that the cleaner is a non-oil, non-soap and non-animal fat based product. These products act like a magnet, attracting dirt and dust. Always test cleaning solutions on a small inconspicuous area before proceeding to clean the entire surface area. For hard to remove residue, a single disc floor machine with a white pad may be used. Be sure to wet the surface first when using a floor machine
Slip Resistance
DCOF is greater than or equal to 0.42
Tensile Strength
ASTM C648 > 350 lbs
Water Absorption
ASTM C373 is less than or equal to 0.5%
Weather Resistance
Thermal Shock - Passes ASTM C484
Sustainability
Human Health
Human Health Impact
Low Emitting/Low VOC, UL GREENGUARD, UL GREENGUARD GOLD, CDPH Standard Method v1.2-2017
